top of page

Colorbond fence price Sydney 2026 – supply and installation cost per metre

Writer: Ivan Pivovarov
Ivan Pivovarov
Sep 30
6 min read
Planning a Colorbond fence in Sydney? We’ve broken down the real costs, what can affect the price and what to expect before getting a quote.
Planning a Colorbond fence in Sydney? We’ve broken down the real costs, what can affect the price and what to expect before getting a quote.

If you are planning a new Colorbond fence in Sydney, one of the first questions is usually simple:

How much does a Colorbond fence cost per metre?

At Best Fence, Colorbond fencing currently starts from approximately $160 per linear metre for supply and installation for straightforward residential fencing projects.

However, the final price depends on more than just the number of metres.

Fence height, site access, demolition, ground conditions, sleepers, gates, additional posts and sloping land can all affect the final quotation.

This guide explains what you can expect to pay for Colorbond fencing in Sydney in 2026 and what can increase the cost of installation.


How much is Colorbond fencing per metre in Sydney?

As a general guide, Colorbond fencing starts from approximately $160 per linear metre for supply and installation.

This is an indicative starting price for straightforward installations.

Your final price will depend on the actual property and project requirements, including:

  • fence length

  • fence height

  • site access

  • ground conditions

  • existing fence removal

  • concrete or other underground obstructions

  • sleepers

  • sloping or uneven ground

  • additional posts

  • gates

  • height extensions or other custom requirements

For an accurate price, Best Fence provides quotations based on the actual site rather than relying only on a standard per-metre rate.


Example Colorbond fence costs

Using the indicative starting rate of $160 per linear metre, a simple project may begin around:

Fence length

Indicative starting cost

10 metres

From $1,600

20 metres

From $3,200

30 metres

From $4,800

40 metres

From $6,400

These examples are a starting guide only.

They do not automatically include demolition, disposal, sleepers, gates, difficult excavation, retaining work or other additional requirements.

Short fencing jobs may also have a higher effective price per metre because mobilisation, delivery, setup and installation costs still apply even when the total fence length is small.


What is included in Colorbond fence supply and installation?

For a standard Colorbond fencing project, the quotation may include:

  • supply of Colorbond fencing materials

  • posts and rails

  • Colorbond sheets or panels

  • standard concrete and fixing materials

  • delivery of materials

  • installation

  • labour

  • standard site clean-up after installation

The exact inclusions are shown in your Best Fence quotation.

If your property requires additional work, this will be identified separately wherever possible so you can understand what you are paying for.


Does fence height affect the price?

Yes.

A taller fence generally requires more material and may require different posts or installation methods.

Common residential Colorbond fence heights include:

  • 1.5 metres

  • 1.8 metres

  • 2.1 metres

A 1.8 m Colorbond fence is a common choice for residential boundary fencing because it provides good privacy while maintaining a clean, modern appearance.

Higher fencing can cost more and may also be subject to planning, council or other property-specific requirements.

If you are unsure what height is suitable for your property, we can assess the site and discuss the available options.


How much does it cost to remove an existing fence?

Existing fence demolition and disposal are normally assessed separately from the basic new-fence installation rate.

The cost depends on what needs to be removed.

For example, removing an old lightweight timber fence may be relatively straightforward, while removing:

  • concrete footings

  • steel posts

  • large timber posts

  • masonry

  • retaining structures

  • heavily overgrown fencing

may require considerably more labour.

Access also matters.

If demolished material has to be carried manually through a house, narrow side passage or difficult backyard, removal can take significantly longer.

Best Fence can include demolition and disposal as part of the quotation when required.


Do sleepers increase the cost?

Yes.

Sleepers may be required where there is a difference in ground level, where soil needs to be retained, or where a client wants a solid base beneath the fence.

At Best Fence, sleepers currently start from approximately $75 each, depending on the type of sleeper and the installation requirements.

The number required will depend on the fence length and site levels.

Not every Colorbond fence needs sleepers.


What happens on sloping ground?

A sloping block does not necessarily prevent Colorbond fencing from being installed, but it can affect the installation method and price.

Depending on the property, the fence may need to be stepped or raked.

A stepped fence is installed in individual sections at different levels to follow the slope.

A raked fence follows the slope more continuously.

The appropriate method depends on the fence system, slope, appearance required and site conditions.

Sloping ground can also require:

  • additional excavation

  • longer posts

  • additional concrete

  • sleepers

  • custom cutting

  • additional installation time

For this reason, properties with significant slopes are normally quoted individually.


What about concrete and difficult ground?

One of the biggest differences between two apparently similar fencing jobs can be what is below the ground.

During installation, contractors may encounter:

  • existing concrete footings

  • old fence posts

  • rock

  • buried construction material

  • tree roots

  • retaining structures

  • unusually hard ground

These conditions can increase excavation and labour requirements.

Where possible, we identify obvious site conditions before work begins. Some underground conditions, however, cannot be confirmed until excavation starts.

How much does a Colorbond pedestrian gate cost?

A pedestrian gate can be installed to match or complement your Colorbond fence.

At Best Fence, pedestrian gates currently start from approximately $1,200, depending on:

  • gate dimensions

  • frame and material

  • posts

  • lock and hardware

  • installation conditions

  • whether additional fencing sections are required

Custom gates are quoted according to the actual dimensions and design.


Can you add height extensions to an existing Colorbond fence?

In some situations, yes.

Existing Colorbond fencing may be suitable for a height extension or additional privacy screening.

Whether this is possible depends on:

  • the existing fence structure

  • post condition

  • current fence height

  • required additional height

  • wind exposure

  • the type of extension requested

We recommend having the existing fence assessed before deciding on an extension.

In some situations, replacing part or all of the fence may be more practical than modifying an older structure.


Why can a small Colorbond fence cost more per metre?

Customers sometimes notice that a 30-metre fence may have a lower effective rate per metre than a very small 4- or 5-metre job.

This is because many project costs apply regardless of fence length.

These can include:

  • travel

  • material delivery

  • site setup

  • equipment

  • purchasing and collecting materials

  • cutting and preparation

  • clean-up

  • waste disposal

For a larger project, these costs are spread across more metres of fencing.

For a small project, they are spread across only a few metres.

This is why the advertised starting price per metre should be used as a guide rather than an automatic calculation for every property.


What can make a Colorbond fence more expensive?

The main factors that can increase the final Colorbond fence price include:

Fence heightMore material may be required for taller fencing.

DemolitionRemoving and disposing of an existing fence adds labour and disposal costs.

Difficult accessNarrow access or properties where materials have to be carried long distances can increase installation time.

Sloping groundStepped or customised installation may require additional labour and materials.

Concrete or rockExisting concrete footings or difficult excavation can increase labour requirements.

SleepersAdditional materials and installation are required.

GatesPedestrian, sliding or automatic gates are priced separately.

Custom workNon-standard dimensions, additional posts, extensions and other modifications may affect the quote.


Is Colorbond cheaper than timber fencing?

Based on Best Fence's current indicative pricing, Colorbond is one of the more affordable fencing options we install.

Our current starting prices are approximately:

  • Colorbond fencing – from $160 per linear metre

  • timber paling fencing – from $200 per linear metre

  • timber lap and cap fencing – from $250 per linear metre

However, price is only one factor when choosing a fence.

Colorbond is popular because it offers:

  • excellent privacy

  • no gaps between panels

  • low maintenance

  • a modern appearance

  • a wide range of colours

  • good durability for Australian conditions

Timber, on the other hand, may be preferred where a more traditional or natural appearance is required.

For a broader comparison of different fencing types, see our Fencing Cost Sydney 2026 guide.


Is Colorbond a good choice for a boundary fence?

For many Sydney properties, yes.

Colorbond is commonly used for:

  • side boundaries

  • rear boundaries

  • residential homes

  • investment properties

  • privacy fencing

  • replacement of old timber fences

It provides a solid visual barrier and requires relatively little ongoing maintenance compared with many traditional timber fencing options.

The best fence type will still depend on the property, surrounding homes, required height and the client's preferred appearance.


How do I get an accurate Colorbond fence price?

The easiest way is to send us:

  • your suburb or property address

  • approximate fence length

  • required fence height

  • photos of the existing fence or boundary

  • whether the old fence needs to be removed

  • whether you require sleepers

  • details of any gates

  • your preferred Colorbond colour, if already selected

Photos are particularly useful because they allow us to see access, ground levels, existing fencing and other site conditions.

For some projects, we may recommend a site inspection before providing the final quotation.


Get a Colorbond fence quote in Sydney

Best Fence supplies and installs Colorbond fencing across Sydney.

Whether you are replacing an old boundary fence, installing fencing for a new property or adding a matching pedestrian gate, we can provide a detailed quotation based on your actual site and requirements.

Send us photos of your fence line and approximate measurements for a quote!

Get a free quote!

Send photos!

Call Best Fence: 0439 447 702

 
 
 

Comments


bottom of page